For screen reader problems with this website, please call(419) 394-53164 1 9 3 9 4 5 3 1 6Standard carrier rates apply to texts.

Shop Online  By Phone    |   
We are now OPEN! Come in and visit us.

Russound® Two-Channel Dual Source Amplifier-P125

Model #: P125
186618
Russound
At a Glance

The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems.

Call for Best Price
$99,999.00Save $NaN

Get to know this product.

The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts into 8 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X125 is rated at 250 watts of power into a single 8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.

Not available to countries requiring CE certification. Modifications are necessary for use at 220v.

  • Volume and balance allows for control at the component instead of volume control or keypad
  • A/B speaker switching easily toggles output between two sets of speakers or zones
  • Signal sensing inputs automatic turn on/off and switching to second source
  • Bridgeable - delivers higher output for use with a subwoofer or outdoor speakers
Specifications

General

Shipping Dimensions18.8" (W) x 5.3" (H) x 22.0" (D), (47.8 x 13.5 x 55.9 cm)
Shipping Weight31.4 lbs (14.2 kg)
Crosstalk> 70dB @ 1 kHz, ref. to rated power @ 8 ohms
Frequency Response20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms, 1W
Input Sensitivity500mV for 80W at 8 ohms
Power Output80W per channel at 8 ohms, 125W per channel at 4 ohms, 250W bridged
Power Requirement(s)120VAC 60Hz 5.8A, 230VAC 50Hz 3A, IEC 320 type connector with 3 terminal detachable power cord.
Signal To Noise Ratio93dB A-weighted

Misc. Specs

Channels2
Analog Audio(RCA) Input2
Product Weight31.4000
WarningProposition 65 Warning for California Residents