For screen reader problems with this website, please call(419) 394-53164 1 9 3 9 4 5 3 1 6Standard carrier rates apply to texts.
The SS-6.2 offers two operating configurations: Impedance Matching and Bypass. Impedance-matching mode provides automatic overload protection for use even with high-power amplifiers. This mode allows multiple pairs of speakers to be safely connected to an amplifier using the built-in automatic impedance-matching circuitry.
Bypass mode is used for direct speaker switching with remote impedance-matching volume controls. This allows local control in each room as well as higher efficiency; however, in this mode the impedance matching and overload protection are not engaged.
Designed for use with 8-ohm loudspeakers, the SS-6.2 also provides safe connection to bridged amplifiers and even works in applications where there is a floating ground. It has spring-loaded speaker terminals for quick connection and can accommodate speaker wire up to 12 gauge.
Shipping Dimensions | 14.7" (W) x 2.5" (H) x 10.3" (D), (37.2 x 6.4 x 26.0 cm) |
Shipping Weight | 3.1 lbs (1.4 kg) |
Connector(S) | Spring terminals |
Frequency Response | 20 Hz - 20 kHz +/- 0 dB |
Max Wire Size | 12 AWG (2.4 mm) |
Min Trigger Level | 15 mV |
Power Handling | 200 watts per channel peak, 70 watts per channel RMS |
Connector Type | Spring Terminals |
Connection Type | Spring Terminals |