For screen reader problems with this website, please call(419) 394-53164 1 9 3 9 4 5 3 1 6Standard carrier rates apply to texts.
BrandSource
(419) 394-5316
The PRO-6HP is a robust, efficient dual-source speaker selector for up to six pairs of speakers. Designed for demanding applications, this high-quality speaker selector features a low-frequency protection circuit to reduce subsonic signals. This allows higher power operation without amplifier shutdown.
Connector Type | Detachable 4-Pole Color-Coded Snap |
---|---|
Connection Type | Detachable 4-Pole Color-Coded Snap |
Shipping Dimensions | 20.3" (W) x 6.2" (H) x 12.2" (D), (51.4 x 15.6 x 30.9 cm) |
---|---|
Shipping Weight | 9.1 lbs (4.2 kg) |
Connector(S) | Detachable 4-pole color-coded snap connectors |
Impedance Matching Type | Autoformer |
Low Frequency Protection | Bipolar capacitor circuit, 6 dB high-pass filter, centered at 30 Hz |
Max Wire Size | 14 AWG (1.9 mm) |
Power Handling | 100 watts RMS continuous per channel, 300 watts peak per channel |
Speaker Impedance | 4 ohms |
An A/B switch on the front panel allows you to power all your speakers with either of two source amplifiers. The PRO-6HP is designed for use with either 4- or 8-ohm speakers.
The PRO-6HP uses audiophile-grade autoformers for impedance matching to maintain a safe operating load at the amplifier while distributing maximum power throughout your system. A rotary switch on the rear panel sets the appropriate impedance for your amplifier, based on the number of speaker pairs connected.
Lets you control speakers in several rooms from a central location
Printed room labels included
Detachable snap connectors are color coded for easy wire termination
Selectable impedance matching accommodates 4- or 8-ohm speakers
Low-frequency protection circuit helps to guard your amplifier
Audiophile-quality autoformers provide high performance for years
Shipping Dimensions | 20.3" (W) x 6.2" (H) x 12.2" (D), (51.4 x 15.6 x 30.9 cm) |
Shipping Weight | 9.1 lbs (4.2 kg) |
Connector(S) | Detachable 4-pole color-coded snap connectors |
Impedance Matching Type | Autoformer |
Low Frequency Protection | Bipolar capacitor circuit, 6 dB high-pass filter, centered at 30 Hz |
Max Wire Size | 14 AWG (1.9 mm) |
Power Handling | 100 watts RMS continuous per channel, 300 watts peak per channel |
Speaker Impedance | 4 ohms |
Connector Type | Detachable 4-Pole Color-Coded Snap |
Connection Type | Detachable 4-Pole Color-Coded Snap |