For screen reader problems with this website, please call(419) 394-53164 1 9 3 9 4 5 3 1 6Standard carrier rates apply to texts.

Shop Online  By Phone    |   
We are now OPEN! Come in and visit us.

Rockford Fosgate® Dual Amp 1/0 AWG Dual Amp Wiring Kit

Model #: RFK1D
Rockford Fosgate
At a Glance
1/0 gauge complete power, ground and signal installation kit for two amplifiers.
Call for Best Price
$99,999.00Save $NaN

Get to know this product.

  • 17 feet of 1/0 AWG power wire
  • 3 feet of 1/0 AWG ground wire
  • 4 feet of 4 AWG power wire
  • 4 feet of 4 AWG ground wire
  • ANL/MAXI fuse holder and fuse
  • 30 feet of 16 AWG speaker wire
  • (3) 16 feet twisted pair RCAs
  • (2) 4 AWG distribution block
  • 20 feet of remote wire
  • 300 Amp fuse
  • FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
  • 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
  • Includes appropriate wire termination hardware
  • 1/0 AWG (53.5mm²) 4,704 strands
  • 4 AWG (21.1mm²) 1,862 strands
  • 16 AWG (1.31mm²) 65 strands
  • 1 Year Warranty


Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.

Includes Power Wire

This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.

Includes Fused Dist.

This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.

Includes Speaker Wire

This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.

Includes RCA Cables

This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.

Dual Amp Installation

This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.



Fuse TypeANL
Dual Amp Installation KitYes
Battery PWR/GND Gauge1/0 AWG
Amplifier PWR/GND Gauge4 AWG
Speaker Wire Gauge16 AWG
Fuse Size300 Amp

Misc. Specs

Manufacturer Warranty1 Year
WarningProposition 65 Warning for California Residents