For screen reader problems with this website, please call(419) 394-53164 1 9 3 9 4 5 3 1 6Standard carrier rates apply to texts.
Kit includes 17 feet of power wire 4 AWG/6 feet of power wire 8 AWG, 3 feet of ground wire 4 AWG/6 feet of ground wire 8 AWG, 30 feet of 16 AWG speaker wire, (2) 16 feet twisted pair RCA's, Maxi fuse holder and fuse, (2) 4 AWG distribution blocks, 20 feet of remote wire, 100 Amp fuse.
Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
|Battery PWR/GND Gauge||4 AWG|
|Amplifier PWR/GND Gauge||8 AWG|
|Speaker Wire Gauge||16 AWG|
|Fuse Size||100 Amp|
|Dual Amp Installation Kit||Yes|
|Manufacturer Warranty||1 Year|